风机里的离心风机，其是风机里的常见类型，并且，是有广泛运用的，因此下面，通过其安装注意事项，及其应急停机情况和正常停机流程这三个实际层面，去进行其的学习工作，便于让大家有课程内容，从而，来进一步认知和掌握离心风机这一种风机。
The centrifugal fan in the fan is a common type in the fan, and it is widely used. Therefore, the following three practical levels, namely, installation precautions, emergency shutdown and normal shutdown process, are used to learn about it, so that everyone can have the course content to further understand and master the centrifugal fan.
1.离心风机安装注意事项
1. Precautions for installation of centrifugal fan
(1)其总体机组安装中，应将风机放置于前提下，随后，应用斜垫铁来找平，不然，无法进行其的安装工作。
(1) In the overall installation of the unit, the fan should be placed under the premise, and then an inclined pad iron should be used to level it. Otherwise, the installation work cannot be carried out.
(2)假如离心风机是现场拼装的，那么，对其基座上的切削加工面，应进行很好维护，防止其损伤或受损。
(2) If the centrifugal fan is assembled on site, the cutting surface on its base should be well maintained to prevent damage or damage.
(3)离心风机的找正，风机轴和电动机轴，假如是不同轴度的话，那么，其轴向定位移不能超过0.05mm。但对滚柱轴承安装的离心风机，当其转子装好之后，其应能够灵便旋转，没有卡阻难题。
(3) For the alignment of centrifugal fan, the axial positioning displacement of fan shaft and motor shaft shall not exceed 0.05mm if they have different degrees of axis. But for the centrifugal fan installed with roller bearings, after the rotor is installed, it should be able to rotate flexibly without jamming.