普通状况下，高压鼓风机具有以下特性：具有吹吸双功用，一机两用，能够用吸风，也能够用吹风；有一款4HB系列的高压鼓风机，还能够同时运用吸风和吹风，相当于旋片真空泵一型槽模具 一次性止血带 保定水处理设备 一次性止血带 保定空压机 北京真空泵样的功用少油或无油运转，输出的空气是洁净的。
Under
normal circumstances, high-pressure blowers have the following
characteristics: they have dual functions of blowing and suction, one
machine for dual use, and can be used for both suction and blowing;
There is a 4HB series high-pressure blower that can also use both
suction and blowing, which is equivalent to a rotary vane vacuum pump
operating with little or no oil, and the output air is clean.
相关于离心风机和中压风机来说，其压力高很多，常常是离心风机的十几倍以上，到压力高达230KPA;假如泵体是整体压铸，并且运用了防震装置脚座，那么它对装置根底的请求也是很低的，以至能够不用固定脚座即可正常运转，十分的便当，也十分的俭省装置费用和装置周期。
Compared
to centrifugal fans and medium pressure fans, their pressure is much
higher, often more than ten times that of centrifugal fans, to a
pressure of up to 230KPA; If the pump body is integrally die-cast and
uses shockproof foot seats, the requirements for the device foundation
are also very low, so that it can operate normally without fixed foot
seats, which is very convenient and saves device costs and cycle time.
相对到其它类型的风机，比方高瑞风机，其运转的噪音较低，功率越大越明显，5.5KW以上就会显现出来；免维护运用；它的损耗件仅仅是两个轴承，在质保期之内，根本上不需求维护；高压鼓风机的机械磨损十分微小，由于除了轴承之外，没其它的机械接触局部。
Compared
to other types of fans, such as the Gaorui fan, its operating noise is
lower, and the higher the power, the more obvious it is. A power output
of 5.5KW or above will appear; Maintenance free use; Its consumable
parts are only two bearings, which do not require maintenance during the
warranty period; The mechanical wear of the high-pressure blower is
very small, as there is no other mechanical contact except for the
bearings.
所以，运用寿命当然也是十分的长，只需是处于正常的运用条件下，3~5年是完整没有问题的。这也是国内高压风机得到提高的大缘由。由于高压鼓风机的运用十分的普遍，由于它的选型也相对复杂。普通来说，需求按以下两个步骤停止。
So,
of course, the service life is also very long, as long as it is under
normal operating conditions, 3-5 years is complete without any problems.
This is also the main reason for the improvement of high-pressure fans
in China. Due to the widespread use of high-pressure blowers, their
selection is also relatively complex. Generally speaking, the demand is
stopped in the following two steps.