四川省川西风机有限公司欢迎您!
全国咨询热线:028-8777 7805
当前位置:首页>>新闻资讯

检查玻璃钢风机入口钟与叶轮是否发生磨察

时间:2023-05-04 09:11:50(部分内容来源于网络,不代表本站观点)

检测玻璃钢风机叶轮轴心是否弯曲
Check if the axis of the fiberglass fan impeller is bent
处理更换轴心重新做动平衡依据作业标准书
Handle the replacement of the shaft center and perform dynamic balancing again according to the operation standard book
检查玻璃钢风机入口钟与叶轮是否发生磨察
Check if the inlet bell and impeller of the fiberglass fan are worn
处理修整入口钟还把轴承座向后移
Handling and repairing the entrance clock, and moving the bearing seat back
轴动式玻璃钢风机检查连轴器之间是否移位或磨檫
Axial type fiberglass fan inspection for displacement or friction between couplings
处理调整玻璃钢风机马达或更换连轴器
Handle and adjust the fiberglass fan motor or replace the coupling
检查玻璃钢风机叶轮结晶物是否过多
Check if there is too much crystallization in the fiberglass fan impeller
处理清洗叶轮上结晶物
Processing and cleaning of crystals on the impeller
检查玻璃钢风机叶轮是否变形叶片是否弯曲
Check if the fiberglass fan impeller is deformed or if the blades are bent
处理更换玻璃钢风机叶轮更换方法依据叶轮安装标准书
The replacement method for fiberglass fan impeller is based on the impeller installation standard book
检测叶轮是否是否失去平衡
Check if the impeller is out of balance
处理检测共震的震源隔绝
Source isolation for processing and detecting co seismic events
检查玻璃钢风机基础平台是否牢固
Check if the foundation platform of the fiberglass fan is secure
处理增加基础平台强度和水平面
Dealing with increasing the strength and level of the foundation platform
检查玻璃钢风机所有的螺丝是否松动
Check if all screws of the fiberglass fan are loose
处理锁紧螺丝更换螺丝
Handle locking screws and replace screws
检查玻璃钢风机叶轮是否有异物吸入风机外壳内部
Check if there are foreign objects sucked into the inner shell of the fiberglass fan impeller
处理清理外壳内异物或清洗风机叶轮
Handle and clean foreign objects inside the casing or clean the fan impeller
处理现场做动平衡依据动平衡作业标准书
Conduct dynamic balancing on site according to the dynamic balancing operation standard book
检查玻璃钢风机轴承是否损坏有异常响声
Check if the bearing of the fiberglass fan is damaged and there is any abnormal noise
处理更换轴承操作规范依据作业标准书
Handling replacement of bearings according to operating standards